Serious UTV racing requires some serious reinforcement to the chassis of your X3. Due to the “tube chassis” design, there are certain areas that flex more than others, and one of these areas happens to be the radius rod mounting points. The Agency Power Billet Radius Rod Plate with a built-in D-Ring can certainly help stiffen up the chassis and eliminate that dreaded radius rod flex many owners struggle with.
Under hard cornering load, the radius rods can flex due to the studded design through the rear bulkhead. While this area is fairly sturdy, the mounting point and factory radius rod plate tend to be flimsy and can change the alignment if cornering too fast. The issue with this is the machine can exert unpredictable handling and cause the driver to be thrown off their line, or even worse, thrown off track completely.
This phenomenon doesn’t just happen while racing either, it can happen while cruising the trails with your friends as well! Installing the Agency Power billet radius rod plate can help alleviate this issue altogether thanks to the rigid CNC machined T6-6061 aluminum construction. By replacing the stock plate with the upgraded Agency Power billet plate, the suspension and alignment will be much more reliable and predictable.
Getting stuck is never a fun time, but the incorporated D-Ring on the billet radius plate makes recovery a quick and easy task. The thick D-Ring can pull you or your buddy out of a troublesome situation or act as a way of towing someone. Fixed with two heavy-duty bolts, the D-Ring is rigid with the plate and offers security and reliability when getting stuck.
Stiffening up the chassis is not the only feature of the Agency Power billet radius rod plate. The four anodized color options allow for customization and style and provide your rig with much-needed rigidity at the same time. The Agency Power radius plate features a black anodized base and gives owners the option to choose Black, Silver, Blue, or Red to suit their personal taste or the machine’s color scheme.
Adding customization, utility, and functionality is what makes the Agency Power billet radius rod plate a must-have part for your machine. Stiffening up the radius rods is vital to the handling of the X3. The anodized finish adds extra styling and a pop of color while also protecting the plate from corrosion. Having an incorporated D-Ring also makes recovery a much easier task instead of fishing rope through the chassis with sharp edges and surrounded by heat.
- Eliminates radius rods flexing under hard cornering
- Constructed of Billet T6-6061 aluminum
- Built-in D-ring to make recovery a breeze
- CNC machined for ultimate precision
- Stainless steel hardware to prevent corrosion
- Customizable anodized inlays
- Base features an anodized black finish for durability
- Easy installation process
- Made in the USA!
- Limited One-Year Warranty