Tag Archives: Exhaust
How To Install Agency Power Mercedes Benz G-Class Exhaust System Includes 4×4 Squared
This guide is to help with the installation of the Agency Power Exhaust for Mercedes Benz G-Class Including 4×4². Install Level: Find the 3 bolt flange connecting muffler to mid pipe on each side of the vehicle. Agency Power recommends spraying some penetrating oil on the bolts to allow for easier removal. Remove the… Read More
How To Install Agency Power VW GTi Mk7 Catback Exhaust System
This guide is to help with the installation of the Agency Power Catback Exhaust for VW GTi Mk7. Install Level: Remove 4 bolts holding brace and put to side to be re-installed later. Unbolt factory slip fit clamp. Then push 3 hangers out of bushing to remove the factory system. Once removed… Read More
How To Install Agency Power Headers and Exhaust System Textron Wildcat XX
This Install Guide is intended to help with the installation of the Agency Power Headers and Exhaust System on the 2018+ Cold Air Intake Textron Wildcat XX. Remove rear tray and cover over exhaust to gain access for install, Un-clip the springs hold the factory muffler to the factory header. Unbolt and… Read More
How To Install Agency Power Honda Civic Catback Exhaust System
This guide is to help with the installation of the Agency Power Catback Exhaust for Honda Civic. Install Level: Unclip and unbolt the car underbody shields. Unbolt the 3 flange bolts. Carefully remove the factory exhaust from the hanger bushings. And lower the factory exhaust off the car. With factory system removed. Install… Read More
How To Install Agency Power Mazda Miata Catback Exhaust System
This guide is to help with the installation of the Agency Power Catback Exhaust for Mazda Miata. Install Level: Step 1: Remove the rear muffler section of your factory set up. Undo the 2 bolts and carefully remove hangers. You will reuse the rubber hanger bushings do not damage, Step 2: Remove 4 bolts… Read More
How To Install Agency Power Infiniti Q50 Catback Exhaust System
This guide is to help with the installation of the Agency Power Catback Exhaust for Infiniti Q50. Install Level: STEP 1 – Unbolt the 4 factory bolts from down-pipes to X-pipe. STEP 2 – Unbolt the 4 factory bolts from mid-pipes to the muffler. Remove the hangers from bushings on the factory muffler… Read More
