Category Archives: Technical Support
How To Install Agency Power Tow Hitch On Your Can-Am X3
With our quick install guide you will be able to replace the factory radius rod plate with the Agency Power tow hitch for your Can-Am Maverick X3. The tow hitch is an excellent tool for pulling a small trailer or using various hitch attaching accessories while also stiffening up the radius rods.… Read More
How to Install Agency Power Handbrake Kit for Can-Am Maverick X3
With this quick guide, you can add a hydraulic handbrake to your Can-Am Maverick X3. Handbrakes are not only be fun, but they can help position the X3 near the limit. We recommend this handbrake for experienced drivers only. This product is intended for off-road use only. We recommend checking all components… Read More
In-Depth Tech Guide to the Can-Am Maverick X3 Turbo Upgrade
We sit down with the complete Agency Power Maverick X3 turbo upgrade and go through the parts and show you how the kit bolts together. The Can-Am Maverick X3 Turbo has revolutionized the UTV world with its performance capabilities. After you have done all the basic bolt-on modifications, the next biggest gain… Read More
How to Install Agency Power Aluminum Door Handles for Can-Am Maverick X3
With this quick guide, you can easily replace the finicky factory Maverick X3 door straps with easy-to-use Agency Power aluminum latches. Only basic tools are required to get this job done. Install Difficulty Estimated Install Time 15-30 Minutes Per Door Parts Right Latch Arm Bracket Right Handle Bracket Left… Read More
How To Install Agency Power Hidden Hood Scoop Light Bar Mounting Brackets for 2014+ Toyota Tundra
This install guide is to help aid the installation of Agency Power part #AP-TUN-910. Level of difficulty: Remove the trim piece off the front of the hood by locating and removing the three bolts underneath and pull trim straight off. Flip the trim piece around and begin to disassemble the factory hood… Read More
How to Install Agency Power Cold Air Intake VW Golf GTI MK7 | Audi A3
This Install Guide is intended to help with the installation of Agency Power Part# AP-MK7-110 Level of difficulty Step 1. Remove the small vacuum line located on the side of the factory airbox Step 2. Pinch the sides of the plastic connector and pull away from the airbox to remove… Read More
