When ADS Motorsport needed an exhaust system for their most recent Can-Am X3’s builds they went with our Agency Power Valvetronic Exhaust System.
This guide is to help with the installation of the Agency Power Can-Am Maverick X3 Turbo Intake. STEP 1 – Remove the plastic intake cover, intercooler vent, and engine access cover. STEP 2 – disconnect the breather hose from factory air box. STEP 3 – Loosen the hose clamps on the intake… Read More
This guide is to help with the installation of the Agency Power Wastegate on the Can-Am Maverick X3. Note: For the VR Tuned 195HP package, we recommend setting the wastegate to 1 FULL turn in from neutral. For the VR Tuned Big Injector kit, we recommend setting the wastegate to 2 FULL… Read More
How to Install the Agency Power Adjustable BOV and Silicone Hose Can-Am Maverick X3 Turbo This guide is to help with the installation of the Agency Power Adjustable BOV and Silicone Hose on the Can-Am Maverick X3 NOTE: The included extra spring (taller) This spring is intended for upgraded turbo applications running… Read More
How to Install Agency Power Race Pipe on the Can-Am Maverick X3 Turbo This guide is to assist with the installation of the Agency Power Race Pipe on the Can-Am Maverick X3 Turbo. Estimated Installation time: 30-60 minutes Recommended Tools for Installation: 3/8 or 1/4 ratcheting wrench with extensions 8mm socket 10mm… Read More
Agency Power Rear Radius Rods – Can-am Maverick X3xRS & X3xRS Max Installation We recommended the the installation and alignment be performed by a qualified professional. Step 1: Loosen the lug nuts on both rear wheels and lift the vehicle so that there is no tension on the rear of the suspension.… Read More