This Install Guide is intended to help with the installation of the Agency Power Boost Increase Valve on the Mahindra Roxor.
Find the diverter valve and line coming off turbo. (Note: Factory vacuum line is black, blue was used for better install visibility. Factory also uses a plastic black nipple not brass as pictured, be very careful as the plastic factory is easily damageable.)
With pliers pull together the hose clamps and move them down on the line. This will allow you to pull off the factory vacuum line.
Once the factory line is removed. Transfer the factory clamps to each side of the Agency Power Boost Increase Valve. Install the new line and valve with the arrows pointing toward the diverter.
Once new line is in place use pliers to move the 2 clamps to secure the new vacuum line. With clamps secured into place your installation is complete.