The Agency Power upgraded intercooler kit for the BMW F22 F87 F30 F32 N55 car is very easy to install. It is a direct replacement and can be swapped in under an hour.
Start your installation by lifting the car and removing the front wheels. Then pull out the inner fender liner from both sides.
Then begin taking out all the bolts and clips that connect the under tray to the front bumper.
With the under tray removed, support the intercooler and begin removing the bolts that hold the intercooler to the frame.
You can now loosen the clamps that hold the intercooler hoses to the intercooler.
Remove the intercooler from the car.
Now its time to install the new Agency Power intercooler.
Raise the intercooler into position.
Connect the intercooler hoses and secure the factory clamps.
Replace hardware to secure intercooler brackets to the vehicles frame or mounting positions.
Replace the factory under tray and secure all clips and hardware.
Replace the factory fender liners
Re-torque the wheels and you are done!